All about motors and gearheads

XW Series SPG Brushless motor series

The absence of brushes in a Brushless DC Motor is perhaps its greatest advantage.  The carbon brushes within a Brush DC Motor eventually wear out and require replacement, which result in down time and cost.  The  Brushless DC Motor generates far less noise due to the elimination of brushes and commutator and sparking between them. 
The Brushless DC Motor is typically smaller and lighter than the Brush DC Motor, making it ideal for applications where weight and space are important factors.  The Brushless DC motor is cleaner, more powerful and requires lower maintenance than the Brush DC Motor. It has higher speed ranges, higher dynamic responses and ultimately outlasts the Brush DC Motor in total operating hours.
  • Advanced feature
  • 10w, 25w, 40w, 90w
  • Voltages 1 phase 100~120 VAC & 200~230 VAC , 50/60Hz
  • Gear ratio available 5,10,15,20,30,50,100,200 to 1
  • Maximum 260 in-lbs torque(with gearhead)
  • Speed control ranges from 100~2000 rpm
  • Small size(max 4.76 inch, less shaft), high torque, modular gearhead system, speed stability (+/-1%) Overload protection, Instant Stop, Slow run and slow stop, Multi point speed setting
  • UL/CSA/DEMKO certified
  • XWM Standard Motor Coding System
1. BLDC Series 2. Frame size
XWM Standard BLDC Motor XWA Series motor 6 2.36″ sq. (60mm)
8 3.15″ sq. (80mm)
9 3.54″ sq. (90mm)
3. Output 4. Pinion Shaft
10 10W G Gear Pinion
25 25W D Flat(D-Cut) Pinion
40 40W
90 90W
  • Motor Specifications
Type Gear Type (D-cut Type) XWM610G/XWM610D XWM825G/XWM825D XWM940G/XWM940D XWM990G/XWM990D
Rated Output(continuous) W 10 25 40 90
Power Input Voltage V 1Ø, 100~120 1Ø, 200~230 1Ø, 100~120 1Ø, 200~230 1Ø, 100~120 1Ø, 200~230 1Ø, 100~120 1Ø, 200~230
Frequency 50/60
Rated Input current A 0.6 0.35 0.9 0.56 1 0.64 2 1.2
Maximum Input Current A 0.8 0.5 1.2 0.8 1.3 0.9 2.6 1.6
Rated Torque N-m (lb-in) 0.05(0.43) 0.125(1.08) 0.20(1.73) 0.45(3.9)
Starting Torque N-m (lb-in) 0.06(0.52) 1.15(1.5) 0.24(2.08) 0.54(4.68)
Motor Permissible Load Inertia Moment J kg-m2 0.5X10-4(2.7) 1.8×10-4(9.8) 3.3×10-4(18.1) 5.8×10-4(31.7)
(oz-in2)
Rated Speed r/min 2000
Speed Control Range r/min 100 ~ 2,000 (Speed Ratio 1:20)
Speed Regulation Load Less than ±1% (0 ~ rated speed)
Voltage Less than ±1% (supply voltage ±10%, at rated speed with no load
Temperature Less than ±1% (0 ~ +40°C (+32 ~+104°F), at rated speed with no load
  •  XWD Standard BLDC Driver Coding System
 
1. BLDC Driver Series 2. Output 3. Voltage
XWD Standard BLDC Driver XWA Series Driver 10 10W A 1Ø 100~ 120VAC
25 25W B 1Ø 200~230VAC
40 40W
90 90W
  •  XTG Standard BLDC Gearhead Coding System
1. BLDC Series 2. Frame size
XTG Standard BLDC XWA Series Gearhead 6 2.36″ sq. (60mm)
8 3.15″ sq. (80mm)
9 3.54″ sq. (90mm)
3. Ratio – Reduction ratio 4. Output
5 1/5 10 1/10 K Key type
15 1/15 20 1/20
30 1/30 50 1/50
100 1/100 200 1/200
  • Permissible Torque with gearhead
N-m/(lb-in)
Gearhead ratio 5 10 15 20 30 50 100 200
Speed variable range 20-400 10-200 6.7-133 5-100 3.3-67 2-40 1-20 0.5-10
Model XWM610 0.22(1.91) 0.45(3.91) 6.8(5.90) 0.90(7.81) 1.3(11.28) 2.1(18.23) 4.2(36.45) 6.0(52.08)
XWM825 0.56(4.86) 1.12(9.72) 1.8(14.58) 2.2(19.09) 3.2(27.77) 5.3(46.00) 10.6(92.00) 16.0(138.87)
XWM940 0.90(7.81) 1.80(15.62) 2.70(23.43) 3.60(31.25) 5.1(44.27) 8.5(73.78) 17.0(147.55) 30.0(260.38)
XWM990 2.10(17.36) 4.10(34.72) 6.00(52.08) 8.00(69.44) 11.5(99.44) 19.3(167.51) 30.0(260.38) 30.0(260.38)
HP(Watt) Motor or Geared Motor Driver
1 phase 100~120 vdc 1 phase 200~230 vdc
PDF 2D DWG 3D STP PDF 2D DWG 3D STP PDF 2D DWG 3D STP
1/74HP(10W) PDF DWG STP PDF DWG STP PDF DWG STP
1/30HP(25W) PDF DWG STP PDF DWG STP PDF DWG STP
1/18HP(40W) PDF DWG STP PDF DWG STP PDF DWG STP
1/8HP(90W) PDF DWG STP PDF DWG STP PDF DWG STP